Recent Articles >> Environment

XFT(tm) FAQs

XFT(tm) FAQs

Q: What makes XFT(tm) different from all the other additives on the market?
A: XFT(tm) is a proven fuel treatment, used in the mining industries over the last two decades. It is very concentrated: one gallon will treat 10,000 gallons of fuel. Not only does it have a combustion catalyst that will help increase fuel economy, XFT(tm) also has detergents to remove harmful deposits from fuel pumps and injectors; lubricants to reduce friction for pistons, fuel pumps and injectors; fuel stabilizers to prolong the life of stored fuel; polymerization retardant and dispersants to reduce sludge in fuel; rust and corrosion inhibitors to protect the fuel system; and demulsifiers to help reduce water that forms in fuel.
Q: Will using XFT(tm) void the engine manufacturer's warranty?
A: No, it won't void the engine manufacturer's warranty. Engine manufacturers cannot discriminate against the use of a fuel additive. Under the terms of the Magnuson-Moss Warranty Act, engine manufacturers must take the position that the use of a fuel additive does not void the engine warranty, unless it can be proven that the specific additive was the cause of the failure.
Q: Can I use lower grades of fuel using XFT(tm)?
A: The XFT(tm) formula allows you to use the lowest octane fuel without causing pings or lower engine performance.
Q: What happens if I put more XFT(tm) in my tank than is recommended?
A: Over-treating will not cause any negative effects on your engine. However, you will not get better esults by using more of the formula. The recommended treatment rate has proven to provide the best results.
Q: Will using XFT(tm) damage my engine?
A: XFT(tm) has been specifically tested to ensure complete compliance with all engine standards and performance criteria. The product will not damage any engine.

For more information visit or call 301-714-0470.

Printable version

<< back to Articles on Environment
<< back to All Articles

All photos are property of Picket News